Cantilever Spring Energized Seals
Section View | Part # Code | Pressure Rating | Application |
---|---|---|---|
standard lip standard head |
EV1A EV2A |
3,000 psig | A good general purpose solution. The EV1A and EV2A series are designed for slow to moderate speeds over a wide temperature and pressure range. |
I.D. Scraper Standard Heel |
EV1B EV2B |
3,000 psig | Used in reciprocating rod applications with viscous fluids. The scraper lip can also be used to "snap" the seal into stepped glands. |
O.D. Scraper Standard Heel |
EV1C EV2C |
3,000 psig | Used in reciprocating piston applications with viscous fluids. The scraper lip can also be used to "snap" the seal into stepped glands. |
Double Scraper Standard Heel |
EV1D EV2D |
3,000 psig | Good for the combination of a stepped gland and reciprocating motion. |
Standard Lip Extended Heel |
EV3A EV4A |
10,000 psig | Same as EV1A and EV2A series but with greater pressure capabilities. |
I.D. Scraper Extended Heel |
EV3B EV4B |
10,000 psig | Same as EV1B and EV2B series but with greater pressure capabilities. |
O.D. Scraper Extended Heel |
EV3C EV4C |
10,000 psig | Same as EV1C and EV2C series but with greater pressure capabilities. |
Double Scraper Extended Heel |
EV3D EV4D |
10,000 psig | Same as EV1D and EV2D series but with greater pressure capabilities. |
Internal Face Seal |
EV5A | 3,000 psig | An excellent alternative to elastomers in applications with difficult combinations of temperature and pressure and little to no motion. The EV5A seals pressure from an internal source. |
External Face Seal |
EV6A | 3,000 psig | An excellent alternative to elastomers in applications with difficult combinations of temperature and pressure and little to no motion. The EV6A seals pressure from an external source. |
Material Code | Description | Typical Applications | Temp Range | COF (µ) |
---|---|---|---|---|
E400 | Virgin PTFE Color: White |
An FDA compliant, light duty material. Good in light gases and cryogenic applications. | -400 to +450 | .05 / .08 |
E471 | Graphite Filled PTFE Color: Black |
The graphite filler in this blend acts as a dry lubricant making it a good choice in dry running services. | -320 to +475 | .06 / .10 |
E431 | Glass/ Moly Filled PTFE Color: Dark Gray |
A highly wear resistant blen good for high speed applications on hardened shafts. | -250 to +550 | .06 / .10 |
E462 | Carbon/ Graphite Filled PTFE Color: Dark Gray |
A good material choice for combinations of speed and temperature. | -320 to +475 | .08 / .12 |
E491 | Ekonol Filled PTFE Color: Beige |
This blend uses a non-abrasisve polymer filler. Best in dynamic applications running against soft metals. | -200 to +550 | .08 / .12 |
E282Z | Carbon/ Graphite/ PPS Filled PTFE Color: Black |
Heavy duty material reserved for the most difficult combinations of temperature, speed and pressure. | -200 to +550 | .08 / .12 |
E220 | Thermoplastic Elastomer Color: Black |
When corrosion resistance and temperature extremes are not the primary concerns TPE is a good choice for tight sealing. | -80 to +275 | .30 / .60 |
E010 | UHMW-PE Color: Translucent White |
An FDA compliant material with very good wear resistance. | -320 to +200 | .15 / .25 |
E020 | Acetal Color: Brown |
As a backup ring this material has good extrusion resistance with low water absorption. | -70 to +250 | .30 / .40 |
E125 | PEEK Color: Tan |
A high-modulus, engineered plastic with excellent thermal and mechanical properties. | -100 to +550 | .35 / .45 |
Wherever advantage you are seeking in your business, ERIKS' know-how can help you achieve it. Our passion for technology and unbiased approach extends from supplying simple parts to helping you improve efficiency, increase performance and lower costs.
Contact us today, we love to help our customers solve their sealing issues.
© 2024 ERIKS Seals and Plastics, Inc.